|Product Name:||J301 PU Adhesive||Color:||White To Pale Yellow Fluid And Dark Brown|
|Component:||A And B||State:||Fluid And Liquid|
|Payment Mothed:||T/T, Paypal||Leading Time:||7-15 Working Days|
PU Based Adhesive J301,
High Viscosity PU Based Adhesive,
J301 2 part polyurethane adhesive
High Viscosity PU Adhesive J301 For Composite Material Two Component
• BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc.
• BEECORE adhesive J301 is a two-component adhesive. Component A is composed of a variety of polyols, adhesion enhancers and fillers. The appearance is a yellowish red viscous fluid, and component B is a coarse MDI. It is a brownish yellow transparent viscous liquid.
|Component A||White to pale yellow fluid slightly change|
|Component B||Dark brown liquid|
|A: Density (g/cm3)||1.56|
|B: Density (g/cm3)||1.21|
|Initialadhesive formation||5-8 hours|
|Features||Cost-effective polyurethane adhesive with high hardness and high initial adhesion for indoor, better machanical behavior, special for railway|
|Technical Parameters ( tested under 20-25°C)|
|Item||Component A||Component B||After Mixing|
|Color||yellow to yellowish red||brownish yellow||Off-white|
|Work life(100g)||50-60 mins|
|Recommended operating time||within 35mins (from mixing to finishing)|
|Temperature Range for application||15-35°C,45% humidity|
|Initial Bonding||5-6 hours at 25°C / 60mins at 65°C|
|Time to reach full cure||1-2 days under room temperature|
|/ 24 hours at 60°C keep 60mins|
|Shearing Strength||≥13MPa (60mins at 60°C or 3 days at 25°C)|
|VOC Test||Accord with GB18538 /TB3139|
|Flame Retardant Rating||S4 (DIN5510)|
3. PU Adhesive has several advantages:
• Good flexibility
• High bonding strength
• Water and heat resistant
• BEECORE Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.
5. Quality control:
A very technical engineering team. The general manager has worked in the Netherlands. The core technologies are introduced from the Netherlands. Others are very young and have more than 5 years of practical experience.
Strict QC team: 8 people are responsible for PU Adhesive of quality control of parts, processing, testing, packaging, etc.
6. PU Adhesive of more pictures:
7. Company profile
1958 Besin brought honeycomb technology into China, and Besin (Suzhou) company was established.
s are widely used for railway industry, Shanghai Expo, marine furniture etc.
lant-porous aluminum honeycomb core, PU adhesive, as well as honeycomb filters.
9. Factory show
Q1. What is PU adhesive used for?
A: Polyurethane composite adhesives are widely used in the construction industry, automobile manufacturing and shipbuilding, such as polyurethane sandwich panels, aluminum honeycomb panels, polystyrene foam panels, fiberglass panels, stone composite panels, metal plates, etc.
Q2. What are the advantages of PU adhesive?
A: PU adhesive has the advantages of good flexibility, high bonding strength, cost-effective, water and heat resistant
Q3. What is the packaging method of PU adhesive?
A: PU adhesive of samples are packed in cardboard and bulk orders are packed in plywood cases.
Contact Person: Stella Li